Read This First


It’s important that you become familiar with operating your Laserlight Core as some issues can easily be solved or explained by understanding how your Laserlight Core is correctly meant to be used. 


Please have a read over our ‘First Time Getting Started’ page and if your problem is not solved please read our troubleshooting guide below. In the instance neither of the previous steps solve the problem please feel free to get in contact with us.



My Laserlight Core White Light Won’t Turn ON


Firstly make sure your Laserlight Core is fully charged by giving a short press on the Laser Control or LED control button. This will indicate the charge level of your Laserlight Core. 


If your Laserlight Core indicates it has some level of charge with a Green, Flashing Green or Red light and will not further turn on, please get in touch with us.


If your Laserlight Core indicates it is less than 25% charged with a Flashing Red light or no light at all, please charge your Laserlight Core. Please try multiple USB ports as not all USB ports are made the same and output varying amounts of power.


If your Laserlight Core continues not to charge or indicates a Green light and will not further turn on please get in touch with us.



My Laserlight Core Laser Won’t Turn On


Please refer to the steps above when considering if the Laser is not working on your Laserlight Core as both the Laser and Light draw power from the same battery.


It’s important to be aware that although we’ve built the Laserlight Core to withstand some knocks and bumps, the most common reason for the Laser failing within the unit is due to significant drops. 


Always be careful when handling your Laserlight Core and always make sure it’s clicked into the bracket after removing.


If you have tried all the steps above, your light has not incurred a significant drop and your Laser is still failing to operate than please get in contact with us - here.



I’m Struggling To Turn My Laserlight Core OFF and ON 


To completely turn your Laserlight Core Light or Laser ON or OFF you need to press the individual buttons.


For the Laser, to cycle through the different light modes from the starting mode of OFF back to OFF again, you will need to push the Laser Control button Three (3) times.


For the Light, to cycle through the different light modes from the starting mode of OFF back to OFF again, you will need to push the Light Control button Five (5) times.


Be sure to take it easy on the buttons as excessive pressure can cause the front button to jam or stick rendering the light unusable. 



The Micro USB Cover Will Not Close

 

The Micro USB is designed to be a tight fit to stop water getting into the charging point of the Laserlight Core so sometimes it can be a little tricky to fit back into place. Keep pushing and gently wiggling and it will eventually go back in, keeping your Laserlight Core charging port nice and dry.



My Laserlight Core’s Light Has Stopped Working


The Laserlight Core contains a Light Emitting Diode (LED) and in the instance of an excessive fall may cause some of LED to stop working. So please be careful when mounting after removing and remember to listen for the click.



The Charge Status LED Doesn’t Come On


As mentioned previously, it’s important to be aware that although we’ve built the Laserlight Core to withstand some knocks and bumps, significant drops may impact some of the functions of the light including the Charge Status LED. 


The Light Doesn’t Fit Into The Mount


The Laserlight Core and its mount are designed to be a tight fit, so in the instance the Light will not fit into the mount please ensure nothing is obstructing its way or catching within the mount.



My Laser Projection Is Skewed


Your Laserlight Core should show a clear bicycle symbol in front of you as you ride. If your light from new is showing a skewed image (which could be 2 x images of a bicycle) then please stop using the light and get in contact with us immediately. 


My Laser Projection Is In The Wrong Position


Before you start riding, it’s important your Laser projection is calibrated to the optimum position. To do this, turn on your Laser after you have mounted your Laserlight Core to your handlebars. Adjust the lights position until the projection of the bicycle is 4 - 6 metres away.


                                                               



Handlebars Are Too Thin Or Too Thick


The Silicone Strap that comes with your Laserlight Core is designed to fit all standard handlebars including 31.8mm and 25.4mm handlebars.


If your handlebars are bigger than the standard 35mm the Silicone Strap has the ability to stretch to fit around a bigger diameter. However, this will increase the chance of the Silicone Strap snapping causing your light to fall off and increasing the chances of your light becoming damaged which is unfortunately not covered under warranty.


If your handlebars are smaller than the standard 25.4mm handlebar you can use the middle horizontal section of the Silicone strap to mount your Laserlight Core. However, this will increase the chance of the Silicone Strap snapping causing your light to fall off and becoming damaged which Beryl holds no responsibility for.


Some Of The Features/Functions Aren’t Working Upon Unpacking


It’s important that if any features of your new light aren’t working upon arrival that you stop using the light and get in contact with us straight away. 


If you’re unaware of what features and functions your light has then please refer to the Product Information document - here.


None of The Solutions Above Worked


If you can’t find a solution in the troubleshooting guide above, please get in contact with us - here - by raising a support ticket. 


We will endeavour to get in contact with you ASAP to help resolve any issues you’re having with your light.