Read This First


We hope you’re excited to get going with your new Laserlight Core! We spent a lot of time crafting the Laserlight Core which has Beryl's patented laser projection technology, combining a white light and a laser image to beam out of blind spots, junctions and situations where you’re otherwise unseen. 


The Laserlight Core is cased in a durable Carbon Grey polymer. The Core is designed to be lightweight making it a perfect addition for any city commuter.


Now, we can imagine you’re excited to get going and illuminate your way around the town, but have a read of the following so you’re completely up-to-date with your new Laserlight Core. 



Opening Your Laserlight Core


When opening your Laserlight Core from it’s beautiful packaging you will notice that it comes with the following items in the box;

  • Laserlight Core

  • Mount

  • Silicone Strap

  • Micro USB Charging Cable






Operating Your Laserlight Core


Your Laserlight Core is designed to make cycling safer, so knowing how to operate it correctly is crucial to receiving maximum value from your light..


You will see two buttons on the top of your Laserlight Core with the forward button responsible for Laser Control and the button behind responsible for the LED Control. 



NOTE - The Laser Control button shows a Laser whilst the LED Control button indicates a circle the same shape as an athletics track. Both Buttons work independently of each other.


  • Laser Control Button

The Laser Control Button will provide three function/modes in the following sequence from being turned off:


1. Steady

2. Flash

3. Off


  • LED Control Button

The LED Control Button will provide five function/modes in the following sequence from being turned off:


  1. Day Flash

  2. Flash

  3. Low steady

  4. High steady

  5. Off


  • Checking your BATTERY LEVEL 

This can be done with a short press of the LED or Laser Control button whilst the light is turned off which will indicate a colour on the charge LED. The following colours indicate:


  • Green 100-80% charged

  • Flashing Green 80-50% charged

  • Red 50-25% charged

  • Flashing Red >25% (charge recommended) 


NOTE: Your Laserlight Core will also display its charge level when turning ON or 

OFF.


  • CHARGING your Laserlight Core

The Charging port for your Laserlight Core is located on the underside of the light and by following the steps below you will be able to charge your light: 

  1. Remove protective Micro USB cap

  2. Insert Micro USB cable supplied into the Laserlight Core

  3. Connect Micro USB cable to power source

  4. Solid Green LED will indicate when your Laserlight Core is 100% charged





Mounting Your Laserlight Core


Your Laserlight Core comes with a handlebar mount that is designed to fit all standard handlebar sizes. Your Laserlight Core can be independently removed from the handlebar mount. 


  1. Insert the Silicone Strap into the side of the Mount which has the plastic tab. 


  1. Place the mount on your handlebar and pull the other end of the Silicone Strap around to secure the Mount to your handlebar.



  1. Slide your Laserlight Core backwards into the Mount until you hear a ‘click’.



  1. To remove your Laserlight Core from the Mount press the plastic tab on the Mount and slide the light forward.



Calibrating Your Laserlight Core Laser


Before you start riding, it’s important your Laser projection is calibrated to the optimum position. To do this, turn on your Laser after you have mounted your Laserlight Core to your handlebars. Adjust the lights position until the projection of the bicycle is 4 - 6 metres away.



Looking After Your Laserlight Core


Taking proper care of your Laserlight Core and showing it some love will increase the longevity of your new light for future use.


  • The Laserlight Core is rated up to a waterproof level of IP55, however we advise not exposing it to high pressure water jets, so please remove before cleaning your bike. 


  • We love natural cleaning agents. Please don’t use alcohol-based or aggressive cleaning products on the Laserlight Core light.


  • Give your Laserlight Core, Mount and Silicone Strap a health-check regularly to make sure there no signs of damage.


  • Prepare your Laserlight Core if it’s off-duty for a while. Make sure to fully charge your light before tucking it away for long periods of time.


  • It’s important to be aware that although we’ve built the Laserlight Core to withstand some knocks and bumps, the most common reason for the Laser failing within the unit is due to significant drops. 



Laserlight Core Warranty


Something not working right? No need to worry. Your Laserlight Core (excluding the battery) comes with a 2 (two) year warranty against manufacturing defects. Your Laserlight Core battery  is covered by a 6 (six) month warranty against manufacturing defects. 


Please note any unauthorised repairs, carried out by an unauthorised party, will void the warranty. So leave it to the experts and get in touch if you’re having issues with your Laserlight Core.


If you have any issues regarding your Laserlight Core please make your way to our Support Portal where you can find answers to common questions and submit a support ticket if you wish to chat with a person - here.